Syba SD-U2HUB-4 - Manual (Page 2)

2
Overview
Thanks for purchasing the USB2.0 Hub Bay (4 ports). Please check whether
the package contains following items:
•
USB2.0 Hub Bay
•
User’s Manual
•
USB2.0 Cable(Type “A” to Type “B”)
•
External Y-power cable or PS/2 to DC Jack cable
•
4 x screws
If any item is missing or damaged, please contact the retailer as soon as
possible.
Features
•
2-in-1 compact size design
•
Fit into any 3.5’’ front panel of any computer casing
•
USB 2.0 compliant
•
Support four downstream ports
•
All four downstream ports supporting high-speed (480Mbps), full-speed
(12Mbps) and low-speed (1.5Mbps) transaction
•
Support Self-Powered mode only
•
Connect up to 127 USB devices
•
Support Over-current detection and individual power control
•
LED indicator support for Power On and port enable
•
Support Windows 98, 98SE, ME, 2000 and XP.
System Requirements
•
Windows 98, 98SE, ME, 2000, XP.
•
An USB 2.0 port installed on your computer.
Installing your USB 2.0 Hub Bay as an external USB2.0 Hub
With your computer switch off ~
Note: This installation assume that you have USB 2.0 ports on your computer
with all the USB 2.0 and USB 2.0 Root Hub device drivers installed properly.
1a. If you choose to use the external power adapter, plug the adapter into an
AC source and plug the power adapter cable to the Hub Bay’s 5V DC
Jack.