Syba IEEE 1394A + USB 2.0 - Manual (Page 7)

a) Three “VIA PCI to USB Open Host
Controller” devices – Full driver support
by Microsoft OpenHCI based drivers, no
additional driver required. Simply follow
the Windows instructions to install the
Microsoft ALi Open Host Controller driver.
b) Windows should also detect a “PCI
Universal Serial Bus” device prompt you
for the driver. Please click the “Cancel”
button to end installation.
2. Insert the supplied Driver Installation CD into the
CDROM drive.
3. Execute the setup program by double clicking on the
SETUP.EXE file in D:\VIA\VT6212 folder of the
Driver Installation CD (Assuming your CDROM
drive is Drive D).
4. Follow the setup program instructions to finish
installing the VIA EHCI drivers. Once the drivers are
installed, you need to restart your Windows.
After you have installed the driver, go to the Device
Manager to check if these items are added;
1.
Under “1394 Bus Controller” in Device Manager,
these items are added.
VIA OHCI Compliant IEEE 1394 Host Controller
2. Under “Universal Serial Bus Controller” in Device
Manager, these items are added.
Standard Enhanced PCI to USB Host Controller
(If MS Windows XP EHCI driver is installed)
VIA Enhanced Host Controller (If VIA EHCI
driver is installed)
VIA Rev 5 or later Host Controller
VIA Rev 5 or later Host Controller