SWIT Electronics S-1221F - Manual (Page 9)

3.7 COLOR submenu
The color submenu is to change the color temperature settings. User can select color temperature as 6500K
、
5600K
、9300K, or define color temperature by RGB
GAIN and RGB BIAS.
⑴ Color temp: 6500K, 5600K, 9300K, USER1,
USER2, USER3
⑵ R GAIN: 0-256 value adjustment
⑶ G GAIN: 0-256 value adjustment
⑷ B GAIN: 0-256 value adjustment
⑸ R BIAS: 0-256 value adjustment
⑹ G BIAS: 0-256 value adjustment
⑺ B BIAS: 0-256 value adjustment
Remark: RGB GAIN and RGB BIAS settings are
only available when “Color temp” is set as USER1,
USER2 or USER3
4. TALLY Light Operation
The front TALLY light can display 3 colors: RED, GREEN and YELLOW. The TALLY light controlling port is the
DB-9 socket at the rear panel, and terminal description is as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
The YELLOW light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting.
Terminal 1 2 3 4 5 6 7 8 9
Description Y G R GND GND GND