Stealth Cam STC-I840IR Rogue-IR - Manual (Page 31)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
31
Using Manual Shoot Option in AVI Mode

Slide the power toggle switch to TEST position. You will hear two
short consecutive beeps followed by a third beep.

Press the MENU button. The Camera icon will flash.

Press RIGHT button to select manual Video Capture Mode.
Video icon will display on the LCD screen to indicate AVI mode.

Press OK to confirm setting, and the icon will stop flashing.

Press MENU to exit settings.

Point and hold the camera steady in the direction to capture the
video. Press the SHUTTER button to start video recording. You
will hear one beep as an indication that the recording process has
started.

Press the SHUTTER button a 2
nd
time to stop video recording. You
will hear one beep as an indication that the recording has stopped
and you will see the front counter digit updated.
(Note: Make sure to press the SHUTTER button a 2
nd
time to
stop video recording, otherwise it will record video indefinitely
until the memory capacity is reached, or until you turn the
power off.)