Stealth Cam STC-ADX - Manual (Page 21)

STC-ADX / STC-ADXRT
www.stealthcam.net Toll Free 877-269-8490 21
Stealth Cam Setting
For setting up PIR capture mode
Press MENU button to show the program setting screen.
Press DOWN button six times to move to Trigger setting.
Press RIGHT button to choose the capturing sequence. Your STC-
ADX/STC-ADXRT can be programmed to shoot 1-3 pictures per
trigger or 10 seconds of video.
Press OK to confirm the number of capture mode setting
Press MENU to exit setting
Or press DOWN button to select desired time out in minutes.
Press RIGHT button to increase the time interval by one min
Press LEFT button to decrease the time interval by one min
Press OK to confirm.