Stealth Cam STC-WD3MT-RT V330MTR - Manual (Page 13)

STC-WD3MT-RT
www.stealthcam.net Toll Free 877-269-8490 13
Set up and Programming.
When the camera is first turned on the internal LCD screen
displays the camera status. The following information is
present on this screen.
If no buttons are pressed after 30 seconds the LCD screen will
power down to conserve battery life. To re-power the screen
press and hold the UP or DOWN button for at least 5 seconds.
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• Flash Control:
o Auto: In low light conditions the flash will automatically
activate.