Stealth Cam STC-U838NG Unit X Ops - Manual (Page 5)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
17
Programming the Stealth Cam using MANUAL mode
Setting the Camera’s Operation Mode:
Your Stealth Cam can be programmed to operation either in PIR Detection
mode or Time Lapse / PIR mode.
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode, the word PIR or tLS will be blinking.
• Press the [UP] or [DN] button to select PIR mode.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
Setting the Resolution in PIR mode:
Your Stealth Cam can be programmed to 3 different resolutions:
High (3 Stars-8Mp), Low (2 Stars–3Mp), Base (1 Star–1.3Mp).
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press [OK] to confirm the camera’s
operation is PIR detection.
•
The word CAMERA and the STARS will be blinking.
• Press the [OK] button ONCE to choose the selection.
• Press the [UP] or [DN] button to select the desired resolution.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
18
• Press [OK] to save your selection.
• Press [MENU] button to exit.
Setting the Capturing Sequence in PIR mode:
Your Stealth Cam can be programmed to shoot 1-9 pictures per triggering.
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press [OK] to confirm the camera’s
operation is PIR detection.
•
Press the [UP] button ONE time to enter the Capturing Sequence setting
mode.
• The word CAMERA will be blinking.
• Press [OK] button and the current number of burst mode images will
blink.
• Press the [UP] or [DN] button to select the desired burst mode setting or
number of pictures per triggering.
•
Press [OK] to save your selection.
• Press [MENU] button to exit.
Setting the Video in PIR mode:
Your Stealth Cam can be programmed to record 10-180 seconds of video per
triggering. The Video mode is only workable under PIR mode.
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press OK to confirm the camera operation
by PIR detection.
•
Press [UP] button TWO times to enter Video setting mode.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
19
• The word VIDEO will be blinking.
• Press [OK] button and the video length in seconds will be blinking.
•
Press [UP] or [DN] button to select the desired video length from 10 to
180 seconds in 5-second increments.
• Press [OK] to save your selection.
•
Press [MENU] button to exit.
Set the Digital Zoom in PIR mode:
Your Stealth Cam can be programmed to have 3 different zoom levels.
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press OK to confirm the camera operation
by PIR detection.
• Press [UP] button THREE times to enter Zoom setting mode.
•
The word ZOOM will be blinking.
•
Press [OK] button and the zoom level number will now blink.
• Press the [UP] or [DN] button to select the desired zoom level setting 1
(1X Normal) / 2 (2X Zoom) / 4 (4X Zoom).
•
Press [OK] to confirm your selection
•
Press [MENU] button to exit.
NOTE: The use of the digital zoom feature may degrade image & video
quality, as this tells the camera to focus on a specific are of the image
and increase its size. This will cause dithering of the image.
Setting the Time Out in PIR mode:
Your Stealth Cam can be programmed to set the amount of time in seconds or
minutes the camera will sleep between PIR triggers.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
20
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press [OK] to confirm the camera operation
by PIR detection.
•
Press [UP] button FOUR times to enter Time Out setting mode.
•
The word TIME OUT will be blinking.
•
Press [OK] button and the MINUTES digits will be blinking.
• Press [UP] or [DN] button to increase or decrease the time value in
minutes from 00 to 59 minutes in 1-minute increments.
•
Press [OK] to save the seconds setting and the SECONDS digits will be
blinking.
• Press [UP] or [DN] button to increase or decrease the time value in
seconds from 05 to 59 seconds in 1-second increments.
• Press [OK] to save the seconds setting.
•
You’ll then see the word TIME blinking.
•
Press [MENU] button to exit.
Setting the Time and Date in PIR operation mode:
Your Stealth Cam uses the 24hr military time format.
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
• Press the [MENU] button within 30 seconds to enter the programming
mode.
•
The word PIR will be blinking, press OK to confirm the camera operation
by PIR detection.
•
Press [DOWN] button TWO times to enter Time and Date mode.
•
The word TIME will be blinking.
•
Press [OK] to enter Minute setting first.
• The MINUTE digits will be blinking.