Stealth Cam STC-SK732NG Skout No Glo - Manual (Page 6)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
21
• Press [DOWN] button TWO times to enter Time and Date mode.
• The word TIME will be blinking.
• Press [OK] to enter Minute setting first.
•
The MINUTE digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the minute value (00 – 59).
•
Press [OK] to save your selection and enter Hour setting.
• The HOUR digits will be blinking.
• Press [UP] or [DN] to increase or decrease the hour value (00 – 23).
• Press [OK] to save your selection and enter Month setting.
•
The Month digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the Month value (1 - 12).
• Press [OK] to save your selection and enter Day setting.
• The Day digits will be blinking.
• Press [UP] or [DN] to increase or decrease the Day value (01 – 31).
•
Press [OK] to confirm the Date setting and enter Year setting.
•
The YEAR digits will be blinking.
• Press [UP] or [DN] to increase or decrease the Year value (01 – 99).
• Once this is all done, press [OK].
•
You’ll then see the word - dEL - blinking.
•
Press [MENU] button to exit the program setting and back to the status
screen.
Setting the Time Lapse Mode:
The Time Lapse default setting value is from 18:00 to 08:00 the next day.
When the camera is set to use the Time-Lapse mode (tLS), the program
settings will follow the Time Lapse settings. Outside of the Time Lapse time
frame; the camera will follow the user defined PIR settings.
The user can set the program for a pre-determined time period [such as 18:00
to 08:00]. The user then sets the frequency of still images only (video function
not available in Time Lapse mode). The camera will remain in Time Lapse
mode until the user has changed the program setting.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
22
• Switch the camera to the Manual position.
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
Press [UP] button until you see the word tLS
blinking.
• Press [OK] to confirm and go into TLS Mode "Start
Time" setting.
• The display will show TIME + S 88:88 (S = Start,
88:88 = time in HH:MM)
•
Press [OK] to set the “Start Time” setting. At this
point you can adjust the time from 00:00 to 23:59.
• The MINUTE digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the
minute value (00 – 59).
• Press [OK] to save your selection and enter Hour setting.
•
The HOUR digits will be blinking.
•
Press [UP] or [DN] to increase or decrease the hour
value (00 – 23).
• Press [OK] to save the “Start Time” setting and
move to the “End Time” setting.
• After completing the start time setting, camera will
go into TLS Mode "End Time" setting.
• The display will show TIME + E 88:88
• (E = End, 88:88 = time in HH:MM)
• At this point you can adjust the time from 00:00 to 23:59 by pressing the
[UP/DN/OK] buttons same as Start Time settings.
• Press [OK] to save the “End Time” settings and move directly to the TIME
OUT setting.
•
Please complete the TIME OUT, Still image resolution, Burst Mode, Zoom
settings like the settings on the PIR operation mode.
•
Then press [MENU] button to exit.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
23
EXAMPLE:
#1: If a user selected the Time Lapse mode, and sets the Start Time to
07:00 and End Time at 20:30, then selects the Timeout to be 3 mins
with a Burst mode of 3 pictures, this means that the camera will keep
taking 3 pictures for every 3 minutes within the time frame of 7:00AM
to 8:30PM. When not within the Time Lapse time frame, the camera
will follow the normal PIR detection settings.
#2: If a user selected the Time Lapse mode setting as Start Time 00:00
and End Time 00:00, then selected the Timeout to be 5 mins with a
Burst mode of 3 pictures, this means the camera will keep taking 3
pictures for every 5 minutes, 24 hours a day non-stop.
TIME LAPSE SETUP RECOMMENDATIONS:
We recommend that if your using the Time Lapse feature and what to extend
your battery life and get the most pictures possible, use the following settings:
Batteries: Energizer Lithium Batteries
Resolution: Base (1 Star–1.3Mp)
Time Out: 15 seconds
Setting up the camera in the field:
Once all program settings have been setup properly, your Stealth Cam is ready
for field use.
Getting started
Listed below are some helpful pointers on how to use your camera to get the
best results.
•
Mount the camera about 4-5 feet high with the camera pointed at a slight
downward angle.
•
Mount the camera facing north or south NOT east or west due to the
rising and setting of the sun could produce false triggers and overexposed
images.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
24
• If you’re covering a trail, face the camera down or up the trail. Most
commercial cameras take 1-3 seconds to sense motion/heat and take a
picture.
•
Clear out any brush or weeds in front of camera. This will cause false
pictures caused wind or high temperature days.
• Double check battery before turning on the camera for use.
•
Make sure to insert the memory card after setting up the game camera.
•
Make sure to turn the camera to Preset or Manual mode (or take out of
Test Mode) before you leave.
• Verify time and date is correct.
(Example: Mounting)