Stealth Cam STC-Z8IRTL Core 8 - Manual (Page 13)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490 13
Inserting
SD
memory
card
•
Insert
SD
memory
card
in
to
the
SD
card
slot
completely
and
in
the
correct
direction
as
shown
by
the
sticker
located
at
the
side
of
the
housing.
•
To
remove
the
SD
memory
card,
depress
the
SD
card
and
pull
out
the
card
gently.
•
SD
cards
must
be
clean
(no
images
from
other
sources).
If
you
are
using
the
SD
card
from
other
cameras,
please
make
sure
to
format
the
SD
card
in
your
computer
prior
to
use
in
your
camera.
New
cards
are
good
to
use
straight
from
the
package.
FORMAT
–
Definition:
When
you
format
a
SD
memory
card,
the
operating
system
erases
all
information
and
files
on
the
card.
Then
it
creates
an
internal
address
tables
that
it
later
uses
to
locate
information
and
files.
Formatting
also
removes
all
Hidden
System
files
as
well.
Basically
it
cleans
your
SD
memory
card
just
like
if
it
was
brand
new.
Please
make
sure
to
follow
the
guidelines
listed
below:
SD
Card
size:
2Gb
or
below,
format
using
File
System
type“FAT”.
SD
Card
size:
4GB
or
above,
format
using
File
System
type
“FAT32”.
NOTE:
Make
sure
camera
is
in
the
OFF
position
whenever
adding
or
removing
memory.
WARNING:The above camera will not accept Class 10 or
above speed rating SD memory cards.