beautypg.com

Stealth Cam STC-NVM Night Vision Monocular User Manual

Page 5

background image

www.stealthcam.com  

Toll  Free  877-­‐269-­‐8490  

5  

FPS  Button  (Default  –  30FPS)  
This  button  will  allow  the  user  to  cycle  through  different  frame  rates.  Decreasing  the  frame  rate  

will  allow  the  sensor  to  gather  more  light  per  frame  and  produce  a  brighter  image.  Additionally  
the  decreased  frame  rate  will  cause  movement  in  the  image  to  become  choppier.    

There  will  be  four  different  modes;    
Ø

30FPS  /  25FPS  /  15FPS  /  8FPS  

Pressing   the   button   will   increment   the   frame   rate   level   by   1   until   the   last   level   is  
reached.  If  the  fps  button  is  pressed  on  the  last  level  of  frame  rate,  the  first  level  of  

frame  rate  will  be  accessed  again    

When  the  unit  is  in  Night  Mode,  the  default  setting  is  25fps.  The  unit  can  only  cycle  

through  25fps,  15fps,  and  8fps.  There  is  no  30fps  option  available.    

When  the  unit  is  in  Day  Mode,  the  default  is  30fps.  The  user  cannot  change  the  fps  in  
daytime  mode.    

 
View  Mode    
During   view   mode,   the   LCD   screen   will   display   a   live   image   of   the   camera   sensor   as   well   as  

display  the  digital  zoom  level  in  the  bottom  left  corner  of  the  LCD  screen.  

The  digital  zoom  mode  will  be  written  in  green  letters  on  the  LCD  screen    

The  digital  zoom  mode  will  be  displayed  as  1X,  2X,  or  3X    

(See  Digital  Zoom  Button  for  additional  details)    

 

Nighttime  view  mode;  the  LCD  screen  will  display  a  small  flashlight  in  the  top  right  corner  of  the  

screen.    

This  icon  will  represent  if  the  IR  LEDs  are  High,  Low,  or  OFF    

This  icon  will  be  a  flash  light  that  will  either  have  a  solid  fill  with  small  lines,  solid  fill  

with  large  lines,  or  no  fill    

This  icon  will  be  green    

If  the  IR  LEDs  are  OFF,  the  flash  light  will  be  displayed  with  no  fill    

If  the  IR  LEDs  are  set  to  Low,  the  flash  light  will  have  a  solid  fill  with  small  lines    

If  the  IR  LEDs  are  set  to  High,  the  flash  light  will  have  a  solid  fill  with  long  lines    

The  battery  life  will  be  displayed  as  a  battery  symbol  with  0  to  4  bars.    

The   color   of   the   battery   symbol   is   green.   Except   when   the   battery   symbol   shows   0  

bars,  then  the  battery  symbol  will  be  yellow