Cobra Electronics COBRA MARINE MR F45-D - Manual (Page 40)

75 Nothing Comes Close to a Cobra ® 74 English
Product Service
Product Service
•
If you have any questions about operation or installing your
new CobraMarine VHF product, or if you are missing parts…
Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!
See customer assistance on page A1.
If your product should require factory service, please call Cobra first before sending
your radio. This will ensure the fastest turn-around time on your repair. You may be
asked to send your radio to the Cobra factory. It will be necessary to furnish the
following to have the product serviced and returned:
1. For warranty repair include some form of proof-of-purchase, such as a
mechanical reproduction or carbon of a sales receipt. If you send the original
receipt, it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the radio. Include a typed
or clearly printed name and address of where the radio is to be returned.
4. Pack radio securely to prevent damage in transit. If possible, use the
original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel
Service (UPS) or Priority Mail to avoid loss in transit to: Cobra Factory Service,
Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois
60707 U.S.A.
6. If the radio is in warranty, upon receipt of your radio it will either be repaired
or exchanged depending on the model. Please allow approximately three (3)
to four (4) weeks before contacting Cobra for status. If the radio is out of
warranty, a letter will automatically be sent informing you of the repair
charge or replacement charge.
If you have any questions, please call 773-889-3087 for assistance.
Customer Service
F
lu
s
h
M
o
u
n
t
T
e
m
p
la
te
/
P
la
n
ti
ll
a
p
a
ra
m
o
n
ta
je
e
m
p
o
tr
a
d
o
Customer
Service
Use
the
supplied
template
to
mark
and
cut
an
opening
in
the
flat
sur
face.
CAUTION Before
cutting,
be
sure
the
area
behind
the
flat
sur
face
is
clear
of
any
instruments
or
wires
that
might
be
damaged
in
the
process.
Use
la
plantilla
suministrada
para
mar
car
y
cortar
el
agujero
en
la
super
ficie
plana.
PRECAUCIÓN Antes
de
cortar
,
compruebe
que
no
haya
instrumentos
o
cables
en
el
área
detrás
de
la
super
ficie
plana,
que
puedan
resultar
dañados
durante
el
proceso.
F45D_Operation_Eng:8186-F55_Operation-Eng 11/23/10 10:50 AM Page 84