SCHOEPS Double MS Tool BF (2012) - Manual (Page 6)

Double MS Plugin Installation, Setup and Userguide
Pro Tools 10
Using the Double MS Tool
BF in ProTools is pretty
easy:
1. Add the three raw
Double MS tracks to
your session.
2. Create a new 5.1
surround output (or
bus). Use the L-R-C-
LFE-Ls-Rs ITU format.
3. Route the front channel
to ,output L‘ of the
created bus. The rear
channel goes to ,R‘ and
finally the figure of eight
to ,C‘
4. Insert the Double MS
Plugin into the master
strip of your bus. Thats
all.
6