Richter KNP-D/F Series Ball Valves (ISO/DIN) - Manual (Page 13)

Series KN/F, KNP/F, KN-D/F, KNP-D/F
Page 13
520-050-en Revision 10
TM 8361 Edition 10/2011
9.5 Conversion from lever to
actuator
Select the actuator in accordance with the
instructions of the actuator manufacturer.
Remove hand lever 203.
Remove lever stop 577 and plug.
Check the fits of the coupling 804, bracket 510
and actuator 850.
Mount bracket 510 with the opening at right angles
to the direction of flow.
Mount coupling 804 and actuator 850. Observe
the actuator position in accordance with the actua-
tor operating manual.
10 Drawings
10.1 Legend
101 main body
102 body end piece
200 ball
201 ball/stem unit
202 stem
203 lever
401 seat ring
403 packing bellows
405/1 thrust ring
502 spring gland follower
503 packing gland follower
510 bracket
526 retaining washer
(DN 15,20,25,40,50,80,100)
550/1 disc
(DN 150, 200)
554/1 washer
554/4 washer
(DN 25)
554/5 washer
(DN 80)
557 grounding spring washer
577 lever stop
804 coupling
includes:
500 ring
952 pressure spring
980/1 round head grooved pin
850 actuator
901/1 hex. screw
(DN 25,40,50)
901/x hex. screw
902/1 stud screw
904/1 set screw
914/2 hex. socket screw (F07)
(DN 50)
918/1 threaded rod
(DN 150, 150/200)
920/x hex. nut
936/x toothed lock washer
993 * Schloß
* nicht im Lieferumfang enthalten