beautypg.com

Caution, Painting the speaker frame and grille – Revel IW70 User Manual

Page 8

background image

8

Revel Performa IW70/IW90

Owner’s Manual

4. Connect the speaker wires to the speaker. Ensure

that the polarity of each connection is correct.

5. Ensure that all six locking tabs are properly

positioned against the locking-tab stops, located
on the speaker frame.

Carefully place the frame assembly into the wall,
ensuring that there is no more than 1/8" play
between the frame and the wall cutout.

After positioning the speaker in the mounting location,
back each screw out one full turn counterclockwise.

6. Screw down each of

the six Phillips-head
screws, alternating
between the six
screws.

The locking tabs will
swivel into place and
secure the unit to the
rear surface of the
wall panel. Hand-
tighten with a nonpowered, straight-handle Phillips-
head screwdriver only. Ensure that the speaker is
securely held in place and that all six locking tabs
are firmly resting against the wall panel.

Note:
Do not use a socket wrench, powered
screwdriver, drill or any other powered tool.

7. Attach the metal grille

and logo.

PAINTING THE SPEAKER FRAME
AND GRILLE

The Revel IW70 and IW90 loudspeakers can be painted
to match any décor. If you wish to change their color,
the satin finish on the grille and frame will function as
a primer coat. Follow these instructions for proper
painting procedure:

1. Before beginning, carefully remove the grille (if installed),

and install the supplied plastic paint shield securely
in the recess in the baffle. The paint shield will
protect the speaker components and baffle from
paint residue.

2. Gently remove the scrim cloth from the grille

before painting.

3. Use a high-quality spray paint and apply a thin

coat of color.

CAUTION!

Ensure that the grille perforations
remain free of paint. Filling
them with paint will diminish
the sound quality.

4. A replacement scrim cloth is supplied. After the paint

has dried, apply a light coat of spray adhesive to
the inside of the perforated grille and attach a new
scrim cloth.

5. Remove the paint shield from the baffle and

attach the grille.

Locking Tab

This manual is related to the following products: