Replay XD XD1080 - Manual (Page 4)

R ECO R D I N G
Press A to Power On/Power Off. Press B to START/STOP Recording. Your Done.
Power On (Standby & Mode Setting Selection): Hold down front button (A) for 2 sec. & release, the Replay
XD1080 will vibrate 3 times & illuminate the blue power LED.
Start Recording: Hold down rear button (B) for 2 sec. & release, the Replay XD1080 will vibrate 3 times, illuminate
the red LED & automatically start recording or capturing.
Note: The red LED on the rear will blink when the memory card is not inserted properly. Make sure the memory card
is fully inserted with the gold contacts face-up until it clicks. Use only Replay XD approved SD cards. Visit
www.replayxd.com for SD card compatibility list.
Stop Recording: Hold down the rear button (B) for 4 sec. & release, the Replay XD1080 will vibrate 1 time to notify
you that it is saving the file.
Power Off: Hold down the front button (A) for 4 sec. and release, the Replay XD1080 will vibrate 1 time & power off.
Note: The power button will not function when recording. This is normal to prevent accidental powering off.
Clip File: While recording quickly press the rear button (B) and release, the Replay XD1080 will vibrate 3 times to notify you
that it is clipping & saving the file, then automatically starts recording or capturing again. This feature allow you to start a new
file without starting or stopping the recording.
E F
A B