Replay XD Prime X - Manual (Page 6)

Now that you’re familiar with your Prime X, lets
charge it and start recording.
1. Remove rear cap and insert your microSD card.
2. Charge your Prime X. Plug your mini USB cable
into a quality 1-2A USB charger and into the
Prime X USB. [See page 7]
3. Turn on your Prime X. Press and Hold the Power
button for 3 seconds, camera will vibrate
3 times and turn on.
4. Choose your Mode, FOV, and FPS [See page 8-9]
5. Replace the rear cap.
6. Recording is simple, Quick Press the Record
button , camera will vibrate 3 times and start
recording.
7. To stop recording, Press and Hold the Record
button to stop, camera will vibrate 1 time and
stop recording. (Allow time to save file.)
8. To turn off, Press and Hold the Power button ,
camera will vibrate 1 time and turn off.
USING YOUR PRIME X
Make sure your SD card has free space before you start your
adventure. We recommend a Class 10 or faster card.
To remove microSD card
1. Place fingernail against edge
of card and press into camera.
2. The card will click and spring
out to be removed.
To insert microSD card
1. Make sure gold contacts
are face-up.
2. Slide card into card slot.
3. The card will click into place
when fully inserted.
A
B
A
A
B
B
TIP: Rear LED lights will turn off after 3 minutes to save
power, press Mode, FOV, or FPS to activate lights.