Reloop SHP-1 - Manual (Page 4)

ENGLISH
Safety Instructions
Any damage caused by the non-observance of this operation ma-
nual excludes any warranty claims. The manufacturer is not liable
for any damage to property or for personal injury caused by impro-
per handling or non-observance of the safety instructions.
- For reasons of safety the unauthorised conversion and/or
modification of the device is prohibited. Please note that in the
event of damage caused by manual modification to this device
any warranty claims are excluded.
- The inside of the device does not contain any parts which
require maintenance, with the exception of wear parts that can
be exchanged from the outside. Only qualified staff must carry
out maintenance, otherwise warranty does not apply!
- Avoid any concussions or violent impact when installing or
operating the device.
- Do not operate the device under extremely hot (in excess of
35° C) or extremely cold (below 5° C) conditions. Keep the
device away from direct exposure to the sun and heat sources
such as radiators, ovens, etc. (even during transport in a closed
vehicle).
- The device must not be operated after being taken from a cold
environment into a warm environment. The condensation
caused hereby may destroy your device. Do not operate the
device until it has reached ambient temperature!
- This device should only be cleaned with a damp cloth. Never use
solvents or cleaning fluids with a petroleum base for cleaning.
- Only use low volume levels. Long use at high volume levels can
cause permanent damage to the ears.
- Make sure to operate this device at low volume levels. Using
high volume levels for long periods causes permanent damage
to the ears.
- Using headphones while riding bikes or driving motor bikes or
cars is prohibited! Audio playback via headphones isolates
ambient noise such as carhorns.
Application In Accordance With Regulations
- These professional headphones are intended for use with
mixing consoles for studio applications as well as with hifi
devices.
- If the device is used for any other purposes than those
described in the operation manual, damage can be caused to
the product, leading to the exclusion of warranty rights.
Maintenance
- Check the technical safety of the device regularly for damage to
the audio cord or casing as well as for wearout of wear parts such
as ear pads.
Operation
- Before operating the Reloop SHP-1 the volume level of the
device that is used in combination with the headphones should
be brought to minimum position.
- Connect the headphones to the device. Then carefully turn up
the volume and make sure not to use high volume levels as this
can cause damage to the ears.
Features
- Professional studio headphones, closed construction
- Large, rotatable earcups
- Neutral playback, perfect for mastering and mixing
- Extremely comfortable ear cushions for highest comfort even
during long studio sessions
- Plug-in cable (exchangeable)
- Outstanding sound characteristics for precise low, clean mid
and crisp high frequencies
- High-quality manufacturing with especially reinforced bracket
construction
- High output power
- Excellent wearing comfort due to marginal weight
- Classy aluminium Reloop signs
Technical Specifications
Frequency Range:
10 Hz – 26 kHz
Impedance: 64 ohms
Acoustic pressure: 100 dB
THD: < 0.2%
Connection: 3.5 mm stereo jack
Adaptor: 6.3 mm stereo jack
Weight: appr. 279 g