RCBS Accessory Base Plate User Manual
Page 2
TRIM PRO
POWDER MEASURE STAND
INTRODUCTION:
The RCBS
®
Accessory Base Plate-2 is a durable die cast aluminum plate
with a series of letter-coded tapped holes for mounting RCBS reloading
tools and accessories.
TO USE:
The Accessory Base Plate-2 attaches to the loading bench with the four
wood screws provided. A variety of RCBS tools and accessories can
be individually mounted to the Accessory Base Plate-2. A few examples
of equipment mounted to the Accessory Base Plate-2 are shown below.
Use the following chart as a guide for determining which bolt pattern to
use for the various tools and accessories. Fasteners needed to mount
the tools listed are included. When mounting a reloading press requiring
the “D” bolt pattern, use the washers provided under the bolt head.