Specifications – Photogenic Professional Lighting Radio Sync PowerLight User Manual
Page 11

11
SPECIFICATIONS
PLR2500DR & PLRX2500DR
General:
Flash Power ..........................................32 to 1000 watt-sec., 6 f-stops
Flash Duration ......................................1/770 second at Full
1/345 second at 1/32
Recycling time.......................................0.8 to 3 seconds
Power Control........................................Full to 1/32 range.
(6 f-stops)
0.1 f-stop resolution.
Digital Display Accessory
Modeling Light Power ..........................250 Watt Quartz, ESS
Modeling Light Control ........................Full to 1/32 range.
0.1 f-stop resolution.
Line voltage regulated.
Triggering .............................................Built in Photoslave.
Push to Test button.
Sync Jack. (12 volt)
Built-in Radio-Sync.
Main Supply PLR2500DR ...................105-125 VAC, 60 Hz, 10 amp.
Main Supply PLRX2500DR ................130 VAC, 50 Hz, 10 amp.
Consumption ........................................0.2 amps idling,
5 amps charge (30A peak).
Voltage Stabilization ............................Plus or minus 0.05 f-stop.
Fuse, external PLR2500DR..................16A, SLO-BLO, 3AG type
Fuse, external PLRX2500DR................8A, SLO-BLO, 5 X 20mm.
Packaging .............................................Extruded Aluminum case.
Weight PLR2500DR.............................7 pounds.
Weight PLRX2500DR..........................8 pounds.
Dimensions PLR2500DR (case)...........4.5” x 4.5” x 8.75”
Dimensions PLXR2500DR (case)........4.5” x 4.5” x 10.75”
Flashtubes and Modeling Lamps:
Flashtube ..............................................Plug-in style, use only
Photogenic’s Standard C4-19
or C4-19C, C4-19D or C4-19F.
Modeling Lamp ....................................250-Watt Quartz Halogen, ESS.
150-Watt Quartz Halogen, ESP.
100-Watt Quartz Halogen, ESR.