Beyonwiz DP-S1 - Manual (Page 106)

Advanced Setup
96
z Time Setting Menu: If you set this, you have to enter the PIN number
when you change the time and date setting.
z
Network Configuration Menu: If you set this, you have to enter the
PIN number when you change the network configuration.
z Service Scan Menu: If you set this, you have to enter the PIN number
to scan service.
z
Factory Setting Menu: If you set this, you have to enter the PIN
number to set your DP-S1 as factory-default setting.
To change the configuration, press the OK button to get a pop-up menu
to change the configuration. Please select with the UP/DOWN buttons
and press the OK button to select. If you do not want to change, press
the EXIT button.
1-4. Preference
1) Time-shifting
If you don’t want to use the time-shifting function, you can disable it.
Please select “Time-shifting” and press the OK button. You can select
“Disable” on the pop-up menu screen. The default configuration is
“Enable”.