Belkin BU3DC001-12V - Manual (Page 10)

Battery Replacement Procedure
The RG Battery Backup is designed with an easy-access battery door.
Replacement of the battery requires removing the battery door on the rear of
the device.
No tools are needed.
STEP 1:
Turn off power switch. Disconnect the RG Battery
Backup from power and any connected devices.
Remove the battery door on the rear of the RG Battery
Backup by pressing the tab on the top of the battery
door and pulling outward.
9
STEP 4:
Securely reconnect battery door.
STEP 2:
Remove the battery from enclosure; remove the wire
connections from the battery.
STEP 3
Connect the new battery (black-to-black, red-to-red);
place the battery into enclosure.
WARNING: Carefully connect the wires to the correct
terminals. The replacement battery will have
color-coded terminals (red = +, black = -).
Do not misconnect the wires.
To order a replacement battery or for recycling information
call: 866-539-5791 or visit: www.belkin.com/gatewaybattery