LaserLyte ADP-TRIR-140 - Low Rez Size - Manual (Page 2)

ADP-TRIR-140
SHOTGUN TRI-RAIL
INSTALLATION INSTRUCTIONS
UNLOAD YOUR FIREARM!
Slide the TRI-RAIL adapter over the magazine tube.
If the barrel lug restricts the adapter from sliding
on, remove barrel and then slide on. Then reinstall
the barrel.
Move the TRI-RAIL adapter into the desired position
on your shotgun. Thread the 2 screws through the
holes and tighten.
If you are using a barrel shroud, take the screws out
of the shroud, clamp the 2 tabs in and slide the
TRI-RAIL over the tabs and line up the holes. Thread
with the TRI-RAIL screws and tighten down.
1
2
3
4
UNLOAD YOUR FIREARM! 1
2
3
4
WARRANTY:
The Shotgun Tri-Rail
is warranted for three years
from any manufacturers
defects from date of purchase.
®
30 N. Alamos Drive - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
ADP-TRIR-140
SHOTGUN TRI-RAIL
INSTALLATION INSTRUCTIONS
UNLOAD YOUR FIREARM!
Slide the TRI-RAIL adapter over the magazine tube.
If the barrel lug restricts the adapter from sliding
on, remove barrel and then slide on. Then reinstall
the barrel.
Move the TRI-RAIL adapter into the desired position
on your shotgun. Thread the 2 screws through the
holes and tighten.
If you are using a barrel shroud, take the screws out
of the shroud, clamp the 2 tabs in and slide the
TRI-RAIL over the tabs and line up the holes. Thread
with the TRI-RAIL screws and tighten down.
1
2
3
4
UNLOAD YOUR FIREARM! 1
2
3
4
WARRANTY:
The Shotgun Tri-Rail
is warranted for three years
from any manufacturers
defects from date of purchase.
®
30 N. Alamos Drive - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
ADP_TRIR_140.indd 2 9/21/12 10:49 AM