LaserLyte TLB-RTK - Large Rez Size - Manual

Questions or Problems?
Contact:
LASERLYTE
928-649-3201
[email protected]
StopSign 4x4.indd 1 8/1/13 11:41 AM Our Limited 3-­‐year Warranty is only valid within the United States.
• LaserLyte offers a 3-­‐year limited warranty.
• If you find your product defective due to
manufacturers defect we will fix or replace the
item at no charge.
• If your warranty expired you may still send it in
to be repaired for a fee.
_________________________________________
TAMPERING WITH OR MODIFYING THE LASERLYTE
PRODUCT IN ANYWAY, WILL VOID WARRANTY.
All returns must have a Return Authorization Number
written clearly on the outside of the package. To
obtain a Return Authorization Number please
call (928) 649-­‐3201 and speak with Customer Service.
StopSign 4x4.indd 2 8/1/13 11:41 AM
1
1
2
3
TRIGGER TYME™ PISTOL
• This training pistol cannot be fired. Please respect all
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use:
Make the LT-PRO ready and insert into the barrel of the
Trigger Tyme™ Pistol.
Pull the trigger to activate the laser. Ensure the LT-PRO
is snug in the barrel.
Aim in a safe direction and shoot the laser at desired
targets.
LT-TT& LT-TTC
2
®
Reaction
Tyme
3
®
Works great with LaserLyte targets.
-
Laser Target, TLB-1: 62 LEDs light up on target, showing the shots
- Reaction Tyme, TLB-RT: 2 training modes, active reaction training
Reaction
Tyme
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
When not in use:
Unscrew adapter.
Insert into LT-PRO as shown.
7
7
8
8
Enfocus Software - Customer Support
When not in use:
Unscrew adapter.
Insert into LT-PRO as shown.
7
7
8
8
Enfocus Software - Customer Support
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED,
YOU MUST REMOVE A PIECE OF PLASTIC
INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM!
Remove plastic insulator from batteries.
Insert screw through adapter and thread
into taper of trainer.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of
the pistol.
Ready your pistol and pull trigger to fire
red laser dot. (LaserLyte recommends
the use of snap caps.)
When removing from your pistol, pull
straight out! Do not twist! Ensure all parts
are out of barrel
When not in use remove batteries and
insert insulator for storage.
1
2
Batteries: (3) 377
Unscrew Battery cap.
Remove batteries.
Install new batteries.
Tighten battery cap. 1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
LT-PRO
WARRANTY:
One Year Limited
Warranty.
Training with
the LT-PRO
will improve:
• Trigger Control
• Unsighted Fire /
Point and Shoot
• Shooting from the
Holster
• Precision Shooting
• Unorthodox Shooting
Positions
STOP
Correct removal NO
NO
+ + +
insulator
Laser Trainer Pro
Installation:
• THE SOUND ACTIVATED SWITCH IS ALWAYS LISTENING
•
THE BATTERIES ARE ALREADY INSTALLED. YOU MUST REMOVE THE
PLASTIC INSULATOR BEFORE OPERATION. SEE BATTERIES SECTION
FOR INSTRUCTIONS.
UNLOAD YOUR FIREARM!
Insert screw through plug & adapter and thread into taper of trainer as shown above.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of the pistol.
Ready your pistol and pull trigger to fire red laser dot.
(LaserLyte recommends the use of snap caps.)
When removing from your pistol, pull straight out!
Do not twist! Ensure all parts are out of barrel.
1
2
3
4
6
5
LT-PRO
LT-PRO Adapter Plug Screw Hex Key
Laser Trainer Pro
Installation:
• THE SOUND ACTIVATED SWITCH IS ALWAYS LISTENING
•
THE BATTERIES ARE ALREADY INSTALLED. YOU MUST REMOVE THE
PLASTIC INSULATOR BEFORE OPERATION. SEE BATTERIES SECTION
FOR INSTRUCTIONS.
UNLOAD YOUR FIREARM!
Insert screw through plug & adapter and thread into taper of trainer as shown above.
Tighten or loosen screw for caliber fit.
Gently press the trainer into the muzzle of the pistol.
Ready your pistol and pull trigger to fire red laser dot.
(LaserLyte recommends the use of snap caps.)
When removing from your pistol, pull straight out!
Do not twist! Ensure all parts are out of barrel.
1
2
3
4
6
5
LT-PRO
LT-PRO Adapter Plug Screw Hex Key
TRAINING TYME ™ KIT
TLB-RTK
1
1
2
3
TRIGGER TYME™ PISTOL
• This training pistol cannot be fired. Please respect all
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use:
Make the LT-PRO ready and insert into the barrel of the
Trigger Tyme™ Pistol.
Pull the trigger to activate the laser. Ensure the LT-PRO
is snug in the barrel.
Aim in a safe direction and shoot the laser at desired
targets.
LT-TT& LT-TTC
2
®
Reaction Tyme
3
®
Works great with LaserLyte targets.
-
Laser Target, TLB-1: 62 LEDs light up on target, showing the shots
- Reaction Tyme, TLB-RT: 2 training modes, active reaction training
Reaction Tyme
***With the LT-TTC, remove the "Plug" from the LT-PRO***
REV 0114