LaserLyte TLB-BEK - Large Rez Size - Manual (Page 2)

1
1
2
3
TRIGGER TYME™ PISTOL
• This training pistol cannot be fired. Please respect all
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use:
Make the LT-PRO ready and insert into the barrel of the
Trigger Tyme™ Pistol.
Pull the trigger to activate the laser. Ensure the LT-PRO
is snug in the barrel.
Aim in a safe direction and shoot the laser at desired
targets.
LT-TT& LT-TTC
2
®
Reaction
Tyme
3
®
Works great with LaserLyte targets.
-
Laser Target, TLB-1: 62 LEDs light up on target, showing the shots
- Reaction Tyme, TLB-RT: 2 training modes, active reaction training
Reaction
Tyme
- Laser Plinking Cans, TLB-BWC
LASER TARGET
TLB-1 Components
* Be sure the TLB-1 Laser Target is in proper
lighting conditions.
A strong light source may affect the TLB-1’s ability to
register “hits”.
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle E: Wall Hanger
F: Battery Compartment
G: DO NOT TOUCH THESE SCREWS
TLB-1
®
Laser
Target
Display
OFF ON
Reset
TLB-1
G
D C
B
A
E
TLB-1 Instructions continued on reverse
® Laser Target Display OFF ON Reset TLB-1
® Laser Target Display OFF ON Reset TLB-1
F
LASER TARGET
TLB-1 Components
* Be sure the TLB-1 Laser Target is in proper
lighting conditions.
A strong light source may affect the TLB-1’s ability to
register “hits”.
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle E: Wall Hanger
F: Battery Compartment
G: DO NOT TOUCH THESE SCREWS
TLB-1
®
Laser
Target
Display
OFF ON
Reset
TLB-1
G
D C
B
A
E
TLB-1 Instructions continued on reverse
® Laser Target Display OFF ON Reset TLB-1
® Laser Target Display OFF ON Reset TLB-1
F
LASER TARGET
TLB-1 Components
* Be sure the TLB-1 Laser Target is in proper
lighting conditions.
A strong light source may affect the TLB-1’s ability to
register “hits”.
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle E: Wall Hanger
F: Battery Compartment
G: DO NOT TOUCH THESE SCREWS
TLB-1
®
Laser
Target
Display
OFF ON
Reset
TLB-1
G
D C
B
A
E
TLB-1 Instructions continued on reverse
® Laser Target Display OFF ON Reset TLB-1
® Laser Target Display OFF ON Reset TLB-1
F
LASER TARGET
TLB-1 Components
* Be sure the TLB-1 Laser Target is in proper
lighting conditions.
A strong light source may affect the TLB-1’s ability to
register “hits”.
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle E: Wall Hanger
F: Battery Compartment
G: DO NOT TOUCH THESE SCREWS
TLB-1
®
Laser
Target
Display
OFF ON
Reset
TLB-1
G
D C
B
A
E
TLB-1 Instructions continued on reverse
® Laser Target Display OFF ON Reset TLB-1
® Laser Target Display OFF ON Reset TLB-1
F
LASER TARGET
TLB-1 Components
* Be sure the TLB-1 Laser Target is in proper
lighting conditions.
A strong light source may affect the TLB-1’s ability to
register “hits”.
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle E: Wall Hanger
F: Battery Compartment
G: DO NOT TOUCH THESE SCREWS
TLB-1
®
Laser
Target
Display
OFF ON
Reset
TLB-1
G
D C
B
A
E
TLB-1 Instructions continued on reverse
® Laser Target Display OFF ON Reset TLB-1
® Laser Target Display OFF ON Reset TLB-1
F
DANGER
LASER LIGHT AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm CLASS IIIa PRODUCT
®
30 N.Al amos Drive - Cottonwood,AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
WARRANTY:
Three Year Limited
Warranty.
TLB-1 Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Position target facing shooter . Be sure the target is in proper lighting
conditions. A strong light source may affect the TLB-1’s ability to register “hits”.
Move switch to ON position.
Fire laser at Reset Circle twice to activate target.
With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
1
1
2
3
4
OFF ON
®
Laser
Target
Display
OFF ON
Reset
TLB-1
Reset
® Laser Target Display OFF ON Reset TLB-1
2
OFF ON
3 4
®
Laser
Target
Display Reset x2
DANGER
LASER LIGHT AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm CLASS IIIa PRODUCT
®
30 N.Al amos Drive - Cottonwood,AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
WARRANTY:
Three Year Limited
Warranty.
TLB-1 Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Position target facing shooter . Be sure the target is in proper lighting
conditions. A strong light source may affect the TLB-1’s ability to register “hits”.
Move switch to ON position.
Fire laser at Reset Circle twice to activate target.
With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
1
1
2
3
4
OFF ON
®
Laser
Target
Display
OFF ON
Reset
TLB-1
Reset
® Laser Target Display OFF ON Reset TLB-1
2
OFF ON
3 4
®
Laser
Target
Display Reset x2
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
30 N.Al amos Drive - Cottonwood,AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
WARRANTY:
Three Year Limited
Warranty.
TLB-1 Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Position target facing shooter . Be sure the target is in proper lighting
conditions. A strong light source may affect the TLB-1’s ability to register “hits”.
Move switch to ON position.
Fire laser at Reset Circle twice to activate target.
With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
1
1
2
3
4
OFF ON
®
Laser
Target Display
OFF ON
Reset
TLB-1
Reset
® Laser Target Display OFF ON Reset TLB-1
2
OFF ON
3 4
®
Laser
Target
Display Reset x2
DANGER
LASER LIGHT AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm CLASS IIIa PRODUCT
®
30 N.Al amos Drive - Cottonwood,AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
WARRANTY:
Three Year Limited
Warranty.
TLB-1 Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Position target facing shooter . Be sure the target is in proper lighting
conditions. A strong light source may affect the TLB-1’s ability to register “hits”.
Move switch to ON position.
Fire laser at Reset Circle twice to activate target.
With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
1
1
2
3
4
OFF ON
®
Laser
Target
Display
OFF ON
Reset
TLB-1
Reset
® Laser Target Display OFF ON Reset TLB-1
2
OFF ON
3 4
®
Laser
Target Display Reset x2
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
30 N.Al amos Drive - Cottonwood,AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
WARRANTY:
Three Year Limited
Warranty.
TLB-1 Target Usage:
To display your shot:
•Firing the red laser dot in the Display circle
will illuminate your shots on the target.
To reset your shots:
•Firing the red laser dot at the Reset circle
will clear the target. Turning the target OFF
and then ON will also clear the target.
Position target facing shooter . Be sure the target is in proper lighting
conditions. A strong light source may affect the TLB-1’s ability to register “hits”.
Move switch to ON position.
Fire laser at Reset Circle twice to activate target.
With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
1
1
2
3
4
OFF ON
®
Laser
Target Display
OFF ON
Reset
TLB-1
Reset
® Laser Target Display OFF ON Reset TLB-1
2
OFF ON
3 4
®
Laser
Target
Display Reset x2