Bosch AUTOMATIC COFFEE CENTRE TCA 6301 UC - Manual (Page 21)

21
The coffee temperature can be set with this function.
q Hold down button
% on display for at least
3 seconds.
q Select TEMP. with < or >.
q Press button
% until the display flashes.
q Change the setting with < or >.
q Press button
% to save the setting.
q Press the & button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function.
The time is displayed in 24h mode.
q Hold down button
% on display for at least
3 seconds.
q Select TIME with < or >.
q Press button
%
- hours display flashes.
q Change the setting with < or>.
q Press button
% - minutes display flashes.
q Change the setting with < or >.
q Press button
%
to save the setting.
q Press the & button. Back to standby.
The set time will be deleted
- if the mains plug is pulled out,
- if the appliance is switched off with the power
switch 1,
- if there is a power failure.
The current time must be set again.
This function is used to set the time at which the
appliance automatically switches on.
q Hold down button
%
on display for at least 3
seconds.
q Select ON AT with < or>.
q Press button
% , hours display flashes.
q Change the setting with < or >.
q Press button
%
, minutes display flashes.
q Change the setting with < or >.
q Press button
% to save the setting.
q Press the & button. Back to standby.
Temperature
TEMP.
normal
TEMP.
high
TEMP.
MAXIMUM
Current time
TIME
--:--
TIME
14:39
Timer
ON AT
--:--
ON AT
07:45