LaserLyte TLB-BWC - Low Rez Size User Manual
Laser plinking can, Instructions for use, Warranty: three year limited warranty

LASER PLINKING CAN
TLB-BWC
DANGER
LASER LIGHT AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
WARRANTY:
Three Year Limited
Warranty.
30 N. Alamos Drive - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
1
1
2
3
5
4
Remove battery cap on top of can and insert provided 9Volt
battery. Place battery back into can, and replace battery cap.
Ensure the Plunger is fully depressed into can. Move switch to
on position.
Stand cans up, and face them toward the shooter.
Fire laser at circle in center of the cans, knocking the cans over.
Stand the cans up, depressing the Plunger, and fire again.
Instructions for Use:
•
Please respect all firearm safety rules and always point lasers and firearms in a
safe direction.
•
For use with any LaserLyte® Laser Trainer.
•
Be sure the cans are in proper lighting conditions. A strong light source may
affect the ability of the cans to register “hits”.
2
3
4
5
ON
OFF
Bottom of can
Plunger
**Low Battery Indicator: When batteries are low, plunger will not retract any more.**
REV 0913
TLB_BWC.indd 1
9/23/13 7:39 AM