LaserLyte UTA-DB - (Low Rez Size) / (Large Rez Size)й - Manual (Page 2)

Diamond Back® .380 & 9mm
1
UTA-DB
Installation:
• UNLOAD FIREARM.
• Attach danger label to side of gun near laser with arrow pointing
toward front sight
Place small button provided into button hole in left-side of laser body shell.
Place left-side of laser body shell on gun, ensuring proper button placement.
Move
pre-assembled right-side laser body shell on top of trigger guard and
left-side and gently squeeze both sides together.
ENSURE PROPER BUTTON PLACEMENT.
From left side (non-battery cover side), insert two 1/2” hex head screws using
the larger .050 hex key provided. Tighten screws until snug.
* Read instructions completely before installing your laser.
Failure to do so may result in damage to your laser or firearm.
2
3
4
5
.380 9mm
L ASER L YTE L ASER L YTE L ASER L YTE L ASER L YTE 1 2 3
4 5
L ASER L YTE
LASER LYTE
Installation: •
UNLOAD FIREARM
1
2 3
2
3
Mounting on other gun: • UNLOAD FIREARM
Uninstall laser from gun.
Unscrew the Phillips Head Screw and remove Master Module.
Put long button in button hole. Put Master Module in place. Put Phillips
Head Screw back in place. Re-attach laser to gun.
380
*Note
380
J1
U1
C1
S1
Remove
Phillips Head
Screw
L ASER L YTE
*Note:
Please ensure the
correct Laser body is
being installed on the
proper corresponding
caliber pistol.
LASERLYTE
L ASER L YTE
5 sec.
1
1 2 3
2
3
Activation: This laser has ambidextrous activation.
Press once turns laser on: constant or pulse
Press and hold for 5 seconds to change mode.
Second press turns laser off.
1
1 3
2
2
3
Laser Sight In:
Use the provided .035 hex key to adjust the sight.
Always end adjustments on a clockwise turn.
Make final adjustments at shooting range.
Moving
Laser
Dot Windage
Windage
Screw
or
Elevation
ON/OFF
L ASER L YTE
down
up right
left
ON/OFF
L ASER L YTE
ON/OFF
L ASER L YTE
or
ON/OFF
L ASER L YTE
ON/OFF
L ASER L YTE
UTA_DB.indd 2 9/5/13 6:12 AM