LaserLyte LSS-0007-140 - Low Rez Size - Manual (Page 2)

UNIVERSAL
Laser Sighting System
Laser Dot
Laser Dot
Sight
2 inch
(5cm)
.25
.50
.75
1.00
1.25
1.50
1.75
2.00
2.25
2.55
2.75
3.00
3
4
5
6
Sight-In Steps
Target
A. I .
II .
B. I .
II .
Turn the laser to the on position.
Lift up on the plastic battery cup.
Pull out and replace batteries.
Insert Batteries with positive
(+) going into cup.
Put battery cup back into bore tool.
1
1
2
3
4
Battery Replacement:
(3) 393 Batteries
2
3
10 Yards/Meters
100 Yards
.25 .50 .75 1.00 1.25 1.50 1.75 2.00 2.25
LSS-0007-140
UNLOAD YOUR FIREARM!
Find adapter to fit your barrel, thread
proper screw into adapter.
Adjust adapter to fit snug inside of barrel.
Roll the switch until it comes on.
Sighting-in:
A. 25-30 Yards/Meters - RECOMMENDED!
I
. Shine laser dot out 25-30 Yards/Meters
II
. Adjust cross hairs directly on top of the dot.
------------------------------- or -----------------------------
B. 10 Yards/Meters
(If 25-30 Yards/Meters not available)
I
. Shine laser dot out 10 Yards/Meters
approximately 2 inches/5cm above the red dot.
REMOVE BORE TOOL! At firing range fire first
100 yard/meter shot. Make final adjustments.
1
2
3
4
5
6
------------------------------- or --------------------------------
4
1
2
UNLOAD
YOUR FIREARM!
.435 to .50 Cal.
.350 to .434 Cal.
.280 to .349 Cal.
.220 to .270 Cal.
25-30 Yards/Meters
DAYLIGHT LASER TARGET
REMOVE BORE TOOL!
WARRANTY:
The Universal Laser
Bore Sighter is warranted
for one year from any
manufacturers defects
from date of purchase.
®
A Division of P&L Industries
101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970
www.LaserLyte.com
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw
WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
Find more Accessories at: www.LaserLyte.com
II
. Using target adjust cross hairs
43188_LSS_0007_140.indd 2 11/22/11 4:53 PM