Answer delay, Remote access, Switch remote access on/off – BT STUDIO 4500 User Manual
Page 37

37
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
Answer delay
Answer delay sets the number of times your BT Studio 4500 will
ring before the answering machine picks up your call. The default
setting is 6 rings. You can change this setting from between 2-9
rings or to time saver mode.
1
. Press the
button, the display shows
anS
Machine
, press .
2
. Press
or
until
anS
SeTTingS
is displayed and press
to select.
3
. Press
or
to display
anSWer
DelaY
and press .
4
. Press
or
to select the number of rings you want
(2-9)or
TiMe
SaVer
and press .
5
. Press and hold to return to standby.
Remote access
You can operate your answering machine remotely from any
Touchtone™ phone by calling your BT Studio 4500 and entering a
4-digit security code.
Switch remote access on/off
1
. Press the
button, the display shows
anS
Machine
, press .
2
. Press
or
until
anS
SeTTingS
is displayed and press
to select.
3
. Press
or
to display
reMOTe
acc
and press .
4
. Press
or
to choose either
On
or
OFF
and
press .
5
. Press and hold to return to standby.
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
Studio 4500 answer machine to
answer calls.