Kino Flo Desk-Lite - Manual (Page 4)

4
On/Off switch is lighted when power is present.
Turn power off before inserting or changing lamp.
Fuse: Replace with 2.0A time delay fuse.
Fixture Operation
Caution
For Desk-Lite 121, 120VAC only
To reduce the risk of fire, electric shock or injury to persons:
a) Use only insulated staples or plastic ties to secure cords;
b) Route and secure cords so that they will not be pinched or damaged
when the cabinet is pushed to the wall;
c) Position the portable cabinet light with respect to the cabinet so the
lamp replacement markings are able to be read during relamping;
d) Not intended for recessed installation in ceilings, or soffits; and
e) The National Electrical Code (NEC) does not permit cords to be
concealed where damage to insulation may go unnoticed. To prevent
fire danger, do not run cord behind walls, ceilings, soffits, or cabinets
where it may be inaccessible for examination. Cords should be visually
examined periodically and immediately replaced when any damage is
noted.