JK Audio RemoteMix One User Manual
Page 4

2
RemoteMix One
Field Interview Tool
Controls & Indicators
3
Signal Level Pots
There are two signal level pots on
the left side of the RemoteMix One
that can be adjusted with a small flat
blade screwdriver. The left pot is to
adjust signal level to the phone. The
right pot is signal level from phone.
These allow a user to compensate for
differences between phones so that
the numbers on the thumb wheels
have a true meaning.
Controls & Indicators
Controls & Indicators
3) Aux Send Control
Adjusts the level of audio from the
3.5 mm Aux Send input jack.
4) Headphones Control
Sets the level of audio sent to the
headphone output jack.
5) Power Indicator
Indicates when the power is turned on.
6) Mic Mute Button
Mutes the Mic input.
7) Power Button
Press to activate the unit. Press again
to turn the unit off.
1
2
3
4
5
7
6
2) Peak Indicator
The peak LED indicates clipping on
the input channel if the level is set
too high. The microphone and Aux
Send are a combined input. If you
see this red LED flashing, you should
decrease the Mic and/or Aux Send
input levels.
1) Mic Control
Controls the level of your microphone
input.
To Phone
From Phone