beautypg.com

Breville 800ES User Manual

Page 16

background image

31

TROUBLE SHOOTING GUIDE

30

TROUBLE SHOOTING GUIDE

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

No steam/hot water

Machine is not turned on

Ensure the machine is plugged in, switched on at

is generated

the power outlet and the ‘on/off’ button is in the
‘on’ position.

Water tank is empty

Refer to step 1 – Filling the water tank on page 13.

Selector Control not in ‘Steam’ position

Turn the selector control to the ‘Steam’ position.
Ensure the steam button is selected for steam and
‘Hot Water’ button selected for hot water.

Steam Wand is blocked

Use the pin on the cleaning tool to clear the
opening. If the steam wand continues to be blocked,
remove the tip of the steam wand using the spanner
in the middle of the cleaning tool. Please refer to
‘Care and cleaning’ on page 25.

Milk is not foamy after frothing

Not enough steam

Steam wand may be blocked. Please refer to ‘Care
and cleaning’ on page 25.

Milk is not fresh and cold

Milk must be cold and fresh. Please refer to ‘How
to froth milk for a cappuccino or latté’ on page 17.

Machine not working

The unit appears to be ‘on’

The safety thermal cut-out may have activated due

but the machine ceases to operate.

to the pump overheating. Turn the machine off and
allow it cool for about 30-60 minutes.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Coffee is too cold

Machine not preheated

Ensure the red ‘Heating’ light cycles off as this is
when the machine has reached the correct
temperature.

Cups not preheated

The cup warming plate starts to warm up as the
machine warms up. Please refer to ‘Pre-warming the
cups’ on page 15.

Milk not heated enough

When the base of the jug becomes too hot to

(if making a cappuccino or latté)

touch this is when the milk is heated at the
correct temperature. Please refer to ‘How to froth
milk for a cappuccino or latté on page 17.

No crema

Coffee is not tamped firmly enough

Refer to ‘Tamping the coffee’ on page 14.

Coffee grind is too coarse

Ensure you use a suitable espresso grind. Refer to
‘The Grind’ on page 21.

Ground Coffee is not fresh

Pre-ground coffee should not be kept for longer
than a week. Please refer to "The coffee’ on page 21.

Filter holes are blocked

Use the fine pin on the cleaning tool to clear the
holes. Please refer to ‘Cleaning the filters’ on page 26.

Machine is making pulsing/

The machine is carrying out the normal operation

No action required as this is the normal

pumping sound while extracting

of the 15 bar pump

operation of the machine

coffee or steaming milk.