JK Audio Guest Module 1 - Manual (Page 4)

2
Guest Module 1 Remote Keypad Technical Information
3
Using Guest Module 1 Technical Information
RJ-45 Modular Pinout:
Pin Description
1) Ground
2) Call / Drop Control
3) Ring / OH LED
4) DTMF Output
5) +5 VDC
6) Reserved
7) Reserved
8) Reserved
Getting Connected
Connect Guest Module 1 to your
JK Audio digital hybrid using an 8
pin RJ45 modular cable. This cable
provides remote power so there is
no need for batteries or an external
power pack. We have provided a 25
foot cable to cover most installations.
If you need a custom length cable, be
sure to purchase a cable wired so that
the wire on pin 1 of each connector is
the same color (pin 1 = pin 1). Data
cables are usually wired pin 1 to pin 1,
but telephone cables are usually wired
pin 1 to pin 8.
Dimensions
Size 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm)
Weight 11 oz (300 g)
Maximum cable length 50 feet.
Operating
The Call button will flicker when a call
comes in. Press this button to answer
or place a call. The button will stay lit
when a call is present. When you dial
on-air, the tones go out on the line,
and do not come back mixed with
the dial tone or caller signal. Guest
Module 1 was designed exclusively for
JK Audio Digital Hybrids.