Human Touch AcuTouch 9500 Massage Chair - Manual (Page 5)

7
ENGLISH
www.humantouch.com
6
Install the floor protector
Notched end of floor protector slides under foot and
calf massager (textured side up); hook-and-loop
fasteners attach to top side of the chair cross-bar.
1. Deploy the foot and calf massager
Press the legs-up button on the remote
control to fully deploy the foot and calf
massager.
2. Place the floor protector
For your safety, before installing the
floor protector, be sure to turn off the
chair at the main power switch and
unplug the power cord.
With the hook-and-loop fastener strip
facing down, slide the floor protector
into place as shown.
USING THE FINE FLOOR PROTECTOR
Your Human Touch massage chair is a powerful
precision instrument. An optional floor protector is
included to ensure smooth operation on fine wood,
tile, or thick-pile carpeted floors.
Installing the floor protector guards against possible
floor damage due to long-term, repeated foot and calf
massager deployment.
3. Secure the floor protector
Align the hook-and-loop fasteners on the underside of
the floor protector with the hook-and-loop fasteners on
top of the chair crossbar. Press the hook-and-loop edge
of the floor protector firmly into place to secure it.
4. Complete the installation
Remove any packaging materials left under or around
the chair during installation. Plug in the chair and
power it on. Press the legs-down button to retract the
foot and calf massager.
Remove the floor protector before moving the chair to a new location.
get ready
part II