HK Audio LUCAS IMPACT - Manual (Page 11)

11
7 Technical Specifications
L.U.C.A.S IMPACT Subwoofer
Line In: XLR female (pin 1= ground; 2= +, 3= -)
Input: Electronically balanced & floating
Input impedance: 47 k ohms
Sensitivity: 0 dBV (=1V)
Sensitivity switch: +4 dBu / -6 dBu
Max. input level: + 20 dBu
Parallel out: XLR male (pin 1= ground; 2=+, 3= -)
Speaker outputs: Speakon® NL 4 (pin 1+= +, 1-= -)
Digital controller:
Sampling frequency:
24 bits/ 48 kHz
Internal signal processing: 56 bits
Amplifiers:
Subwoofer output:
1x 700 W / Class D power amp
Satellites output: 2x 250 W / Class D power amp
Protective circuits: DDO™ controlled multi-band limiter
Speakers:
Woofer: 1x
15"
Subwoofer frequency response: 45 Hz -130 Hz, ± 3 dB
36 Hz -130 Hz, - 10 dB
SPL 1W / 1m: 101 dB (half space)
Max. SPL / 1m: 127 dB @ 10% THD (half space)
Weights and measures:
Weight:
32 kg / 70.4 lbs.
Dimensions without casters: 47.5 cm x 47 cm x 58.5 cm
(WxHxD) 18 3/4 " x 18 1/2" x 23"
L.U.C.A.S IMPACT Satellite
Inputs:
Speaker input:
Speakon NL 4 (pin 1+= +, 1-= -)
Speakers:
Woofer: 1x
8"
Driver: 1x 1"
Directivity: 60°x 40° CD horn
Overall nominal impedance: 8 ohms
Nominal power handling: 250 W RMS
SPL 1W / 1m: 103 dB (half space)
Max. SPL / 1m: 125 dB @ 10% THD (half space)
Frequency response: 130 Hz - 19 kHz, +/- 3 dB
(via DDO™ Controller)
Crossover frequency (passive):
2.2 kHz/ 12 dB / octave
Driver protection: Dynamic protective circuit
Pole mount: HK Audio MonoTilt™ 36 mm, -10°
Weights and measures:
Weight:
7.5 kg / 16.5 lbs.
Dimensions (WxHxD): 25.8 cm x 38.5 cm x 28.5 cm
10 1/8" x 15 1/8" x 11 1/4"
General electrical data::
Protection class 1 (protectively earthed)
Max. current consumption: 4.4 A (220 – 240 V) • 8 A (110 – 120 V)
Max. power consumption: 1000 Watts
Mains voltage range: +/- 10%
Internal fuses: 250V/ T 8A IEC127
Ambient temperature range during operation: -10° C to +35° C
English