HK Audio CDR 210 F - Manual (Page 28)

Manual
COHEDRA
® & COHEDRA ® Compact
Figure 12 a
Figure 12 b
Figure 12 c Figure 12 g
Figure 12 d
Figure 12 e
Figure 12 f
Figure 11: Open case with four mid/high range enclosures
7 Mounting the
Top Rigging Frame
The tasks described below require two people.
Remove all three quick-release pins from their re-
ceptacles on the top rigging frame and the top pin
on the back of the top mid/high range enclosure
(preferably CDR 208 S). Set the top rigging frame
on the topmost enclosure. First attach the two front
connectors. Turn the connector component so that
the rounded side of the component faces forward
(see Fig. 12 a – g). Insert the pin of the top mid/
high enclosure through the slot on the connector
component and into the eyelet labeled 0°.