Radio reception, Seek tuning 1, Manual tuning 1 – Blaupunkt CD 2001 User Manual

Page 5: Scan tuning 1, Preset scan tuning 1, Local/distant (lo/dx) selection

E-4

ENGLISH

Seek Tuning

Press the

to select the desired band.

➜

III

➜

Press the

to tune in stations. Seek tuning auto-

matically stops at a broadcasted frequency.
When tuning to FM stereo broadcasting stations, the
“

” stereo indicator will light up in the display window.

Manual Tuning

Press the

to select the desired band.

Press the

and hold for more than 0.5 second

to activate the manual tuning mode. Press again to tune in
to stations.
After 4 seconds duration of completing Manual Tuning, the
tuning control will revert to the Seek Tuning mode.

Scan Tuning

Press the

to select the desired radio band.

Press the

The unit will scan the selected radio band for stations.
Press the

again to stop Scan Tuning and remain on

this selected frequency.

Tips

When tuned in to broadcasting stations, the antenna indicator

on the display window is lit.

Preset Scan Tuning

Press the

to select the desired radio band.

Press the

The unit will scan preset memory for the 12 stations from
the AM

/AM

band or the 18 stations from the FM

or FM

and FM

III

bands. The unit will stop at each preset sta-

tion for 8 seconds, before continuing to the next preset sta-
tion.
Press the

again to stop Preset Scan Tuning and re-

main this on the selected frequency.

Memorizing Stations Automatically (Travel Store)

Press the

to select the desired band.

Hold the

pressed for longer than 2 seconds.

Up to 6 stations with strong signals will be automatically
stored in preset memory for the selected band.

Note

This function is available for FM III and AM II.

Memorizing Only the Desired Stations

A total of 30 stations (18 for the FM

, FM

and FM

III

, 12 for

and AM

) can be stored in preset memory.

Press the

to select the desired radio band.

Press the

to tune in stations.

Press and hold the desired preset memory button

for about 2 seconds until the frequency indicator

flashes twice.
The number of the pressed preset memory button appears
on the display window.

Note

If/when you store another station on the same preset number
button, the previously stored station is replaced with new one.

Receiving the Memorized Stations

Press the

to select the desired radio band.

Press the

momentarily.

Local/Distant (LO/DX) Selection

This feature is used to select the strength of the signals at which
the radio will stop during Seek Tuning.

Press the

LD/SENS

for more than 2 seconds to select the Local

setting and only the strongest (local) stations will be received.
The “lo” indicator appears in the display window.
Pressing again for 2 seconds will select the Distant setting and
the radio will stop at a wider range of signals, including weaker
more distant stations. The “lo” indicator will go out on the dis-
play window.
The “Distant” setting is the recommended default mode of re-
ception.

Radio Reception

CD 2001_p.1-9 (E)

2/11/00, 1:32 PM