GunVault MVB 1000 - Manual (Page 4)

- 3 -
GETTING STARTED
NOTE: Set your keys to the side. Don’t lock them inside the safe!
Make sure to remove the backup key from the MicroVault XL Biometric
before use and secure them.
The key is for emergency use only to unlock the case in the event of
fingerprint failure.
If the key is used to access the MicroVault XL Biometric; it can only be
removed from the lock cylinder by returning the key back to its original
locked position.
Please do not try to remove the key in any other position or this may cause
damage.
Do not try to use the fingerprint scanner and electronic locking system
while the key is in the unit.