GEPE G5002 Portable Viewer - Manual (Page 2)

GEPE DIABETRAKTARE
G 5002
Bruksanvisning
Apparatens delar:
1. Kåpa 6. Halsrem
2. Linsstöd 7. Batterilock
3. Lins 8. Bottenplatta
4. Betraktningsbord 9. Strömbrytare
5. Övre Lock 10. Indikator
Isättning av batterier:
Öppna batteriluckan på apparatens undersida och sätt i 4 batterier typ “ AA “. Var noga
med att vända batterierna åt rätt håll enligt markeringarna. Sätt tillbaka batterilocket.
Handhavande:
1. Fäll upp kåpan tills den kommer i 90° mot betraktningsytan.
2. Lyft upp linsstödet till horisontalläge enl. bilden ovan.
3. Sätt strömbrytaren i läge “ ON “, varvid lampan ( CCFL ) och indikatorn tänds.
4. Lägg diabilden på betraktningsbordet.
Observera:
1 Tag ur batterierna om apparaten ej skall användas under en längre period.
2 Byt alla batterierna samtidigt.
3 Linser och annat kan rengöras med en mjuk putsduk.
4 CCFL-lamporna innehåller kvicksilver och skall efter förbrukning tas om hand på
lämpligt sätt.
5 Reparation skall endast utföras av verkstad.
Tekniska data:
Strömkälla: 4 x 1,5V Alkaline AA-batterier
Lins: Förstoring 1.8X
Betraktningsyta: 43 x 42 mm
Ljuskälla: Cold Cathode Fluorescent lamp ( CCFL )
Färgtemperatur: 5000K ± 270
Mått: 15.5 x 6.2 x 2.4 cm
Lins: 4.3 x 4.3 cm
GEPE HAND HELD SLIDE VIEWER
G5002
Operation Instructions
Various Parts of the Slide Viewer:
1 Folding Cover 6 Neck Cord
2 Lens Support 7 Battery Compartment Cover
3 Magnifying Lens 8 Base Plate
4 Viewing Surface 9 On/off Switch
5 Top Cover 10 Power-on Indicator
Battery Loading:
Remove the battery compartment cover from the bottom of the slide viewer. Insert
4 “AA” size alkaline batteries into the compartment, aligning the polarity correctly
according to the markings. Replace the battery compartment cover.
Operation:
5. Open the Folding Cover until it is 90 degrees to the Viewing Surface.
6. Lift the Lens Support to the horizontal position as shown in the picture above.
7. Slide the On/Off switch to the “On” position. The Cold Cathode Fluorescent Lamp
(CCFL) and the Power-on Indicator will go on at the same time.
8. Put your slide on the Viewing Surface and view its magnified image through the
Lens.
Caution:
4. If the slide viewer will not be used for a long time, remove the batteries from the
battery compartment and keep the slide viewer in a dry place.
5. If the light intensity drops, replacement of batteries is required. It is advisable to
replace all batteries at one time.
6. Clean the Magnifying Lens and the Viewing Surface with a soft dry cotton cloth or
lens cleaning cloth.
7. The CCFL tubes contain mercury. Consult local regulations concerning treatment of
hazardous wastes when disposing of the lamps.
8. Do not attempt to open or repair the unit as such work must be carried out by qualified
technicians.
Specifications:
Power Source: 4 x 1.5 AA size alkaline cells
Glass Lens: 1.8 x
Light Source: Cold Cathode Fluorescent Lamp (CCFL)
Color Temperature: 5000 K + 270
Slide Viewing Area 1.7 x 1.11” (43 x 42 mm)
External Dimensions 6.1 x 2.4 x 0.95” (15.5 x 6.2 x 2.4 cm)
Net Weight 4.8 oz less batteries (150 G)
Illuminated Area 1.7 x 1.11” (4.3 x 4.2 cm)
Lens Size 1.7 x 1.7” (4.3 x 4.3 cm)