GBC T500Pro Thermal Bind - Manual (Page 5)

5
G
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within
the guarantee period, ACCO Brands Europe will at its
own discretion either repair or replace the defective
machine free of charge. Defects due to misuse or use
for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs or alterations made by persons not authorised
by ACCO Brands Europe will invalidate the guarantee.
It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect
the legal rights which consumers have under applicable
national legislation governing the sale of goods.
Register this product online at www.accoeurope.com
Heating the document
1 The cover must be inserted into the binder so the
spine is in contact with the heating element (Fig.4).
2 The binding cycle will begin automatically and is
shown visually with LED lights.
3 After completion, the green light <> comes
on and at the same time an audible signal will be
heard. This audible signal will be repeated as long as
the document is left in the binding unit.
4 After the audible signal is heard, remove the
document immediately.
Note: if the document is left in the binding unit for
too long, the quality of binding could be affected.
5 The binding unit is now ready to receive the next
cover.
Allow the document to cool
and harden
1 Jog the complete document once firmly down its
spine. This ensures that every sheet is inserted into
the glue.
2 Hold the completed document in one hand and with
thumb and one finger, squeeze the back together
to ensure that the first and last sheets are properly
bound. This will also guarantee the correct U form of
the cover spine.
3 Place the bound document into the cooling rack
to allow adequate cooling. Should any sheets be
incorrectly bound please repeat the binding operation
(Fig.5).
Multiple binds
1 The binding process can be carried out with several
copies at the same time. The heating channel will
hold a combination of documents up to 45mm in
thickness.
Folding the score mark
1 Fold back the front cover along the score mark
as this will ensure easy opening of the completed
document.
Auto shut off
1 The machine will turn off 45 minutes after the last
binding operation. An automatic security system
turns <> the binding unit.
After use
1 When all binding is complete, press the on/off switch
once again, turning the machine off.
2 Remember to remove the plug from the electricity
supply when the machine is not in use.