Buhler Allied FK331 - Manual (Page 9)

74” Allied Snowblower
6
INSTALLATION
To install safety signs, ensure the installation area is clean and dry. Decide on the exact
position before you remove the backing paper. Remove the smallest portion of the split
backing paper and align over the specified area. Carefully press in place. Slowly peel
back the remaining paper and smooth the remaining portion in place. Small air pockets
can be pierced with a pin and smoothed out.
WHEN ORDERING PARTS
Always give your dealer the
Model and Serial Number of your
machine to assist him in ordering
and obtaining the correct parts.
Use the exploded view and
tabular listing of the area of
interest to exactly identify the
required part.
#1
#2 #3
#2 #3