Binatone D33 - Manual (Page 2)

Page 2
■ Binatone Help Line: 01325 304473, 9.00 am to 5.00 pm, Monday to Friday.
Connection and conditions for use
You can connect your D33, to public networks in the UK; or to an approved PBX using DTMF signalling.
Each item of telephone equipment (phones, fax machines, etc.) has a ringer equivalence numbers
(REN). The RENs of all equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
D33 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.
Note :
Subscription to the Caller ID Service is required for the phone to display the callers number.
Please contact your line Provider. If you do not subscribe to Caller ID, the Caller Display will not
work but the phone will work.
Installing (or Replacing) the Battery
Use screwdriver to remove the screw in the battery compartment cover on the bottom of the base unit.
IMPORTANT — before removing the battery compartment cover, always make sure the base unit
is disconnected from the telephone line.
❉ Install 3 Alkaline AAA batteries into the battery compartment and re-fit the cover before use.
Warning : The unit will not work without batteries fitted.
BASIC FUNCTION
THE DISPLAY
On-Hook Status:
Battery compartment
cover
Off-Hook symbol
This appears when you
pick up the handset/
speakerphone
Dialling numbers
Call timer
0 8
Current date Current year
Current time
Number of
New Calls Total of calls
OPERATION
3 R03/AAA Alkaline batteries
D33 User Guide-June03 6/13/2003, 3:06 PM Page 2 Adobe PageMaker 6.5C/PPC