E-flite Mini Pulse XT PNP - Manual (Page 10)

10 E-flite Mini Pulse PNP Assembly Manual
  3. Fit the assembly in Step 2 into the wheel pant and
insert the bolt into the landing gear. With the fuselage
level to the work surface, rotate the wheel pant so it is
also level to your work surface and secure the pant to the
landing gear with a 2mm x 6mm wood screw. Secure the
bolt with a 4-40 locknut while using needle-nose pliers to
hold the head of the bolt inside the pant.
 4. Repeat Steps 2 and 3 for the remaining wheel and
wheel pant.
Propeller Installation
Required Parts
Fuselage w/motor installed
Propeller
Spinner
Prop adapter (for outrunner motor)
Important Information About Your Propeller
It is also very important to check to be sure the propeller is
balanced before installing onto the shaft. An unbalanced
propeller may strip the gears or cause poor flight characteristics.
 1. Slide the propeller adapter through the hole in
the propeller.