Blackline GPS LonerGPS User Manual

Page 9

Keypad

The LonerGPS keypad provides the mobile worker with the following functions and indications:

•

Power button: The power button is used to turn the LonerGPS device on and off.

•

Green indicator light: The green indicator light tells the user the power status and also whether
connected to the wireless service

•

Emergency button: The emergency button allows the user to trigger an emergency alert to their
monitoring personnel via LonerPortal

•

Red indicator light: The red indicator light provides status of alerts

Charging LonerGPS

LonerGPS is conveniently charged using the supplied wall charger. The wall charger is compatible with
any North American 110/120 VAC 60 Hz outlet and consumes approximately 0.5A of current while fast-
charging.

To charge a LonerGPS device:

•

Plug the wall charger into the wall

•

Ensure that the wall plug has power using a test light, if necessary

•

Plug the DC plug into the LonerGPS charging jack

Note

Note: If the LonerGPS is currently powered, please note that plugging the device into power will turn
LonerGPS off. This ensures that the device will not trigger no-motion alerts while charging. BlackLine
GPS recommends that a regular charging habit be used to ensure that devices do not enter the field with
near-empty battery capacity.

Wearing LonerGPS

LonerGPS is designed for wearing on a belt using the supplied holster with built-in belt clip, as shown in
the image below.

Note – the LonerGPS logo must face outward, away from the mobile worker’s body for optimum GPS
performance.