Appendix – Blaupunkt RCR 45 User Manual

Page 16

Verona RCR 45

(Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.

LOCAL

(lo)
To adjust the seek tuning
sensitivity for local recepti-
on.

LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity

DIS

(dx)
To adjust the seek tuning
sensitivity for distant recep-
tion.

DIS. 1- high sensitivity
DIS. 3- low sensitivity

LEARN KC

To “define” a second Key-
Card for use with the set.
Please read the information
under “KeyCard theft-pro-
tection system”.

To quit the DSC programming mode and
store the adjustment:
•

Press DSC.

If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.

Overview of the DSC factory
settings

TA VOL

: 4

BEEP

: 3

LED (Code) : 1
LOUD

: 4

: OFF

LOCAL

: 1

DIS

: 1

Appendix

Care notes

Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50

Celsius. Allow very cold

tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!