Installation, Choosing a location – BenQ PB2240 User Manual

Page 18

Text mode
Original mode

Installation

Choosing a Location

Your projector is designed to be installed in the four installation configurations shown here:
Floor front, Ceiling front, Floor rear, Ceiling rear. Your room layout or personal preference
will dictate which installation configuration you use.

For further information on the four configurations, please refer to page

If you place the projector above or below the screen, you have to tilt it down or up to center
the image on the screen, in these situations image distortion will occur. Use the Keystone
function to correct the distortion. See page

for keystone correction.

I. Floor front

II. Ceiling front

III. Floor rear

IV. Ceiling rear

This manual is related to the following products:

PB2140