Behringer 1 - Manual (Page 12)

12 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual
This illustration shows just one example of how the channels of your power mixer
can be used, including the connection of mono and stereo sources, and the tape
ins and outs recording the mix signal or playing back external signals.
EUROPOWER PMP1680S
Stereo channel 7/8
Dat recorder
Electric
guitar
V-AMP2
Keyboard
Vocal mics
Electric
bass
DI box
Mono
channel 5
Mono
channels 1-4 Mono
channel 6
Tape In/Out
Fig. 5.3: Standard set-up (example)
One example of how to use your power mixer with a subwoofer in bridged mono
mode. The illustration shows the PMP1680S with a subwoofer connected to
OUTPUT B that will receive the full (bridged) output power. A separate stereo
power amp (BEHRINGER EUROPOWER EP2000) for the stereo main P.A. signal is
connected to the Pre Amp Main outputs. The Pre Amp monitor output is wired
to active speakers on the stage. This application can also be realized with the
PMP960M, except for the main P.A. signal, which would be mono.
Subwoofer
EUROLIVE
B1220 PRO
EUROLIVE
B1800X PRO Subwoofer
2 x BEHRINGER B215A
(active)
F.O.H. mix Monitor mix
EUROPOWER EP1500
Fig. 5.4: EUROPOWER in bridged mono mode