BellSouth PID99 - Manual (Page 5)

6
S E T - U P I N S T R U C T I O N S
S t e p 1 C o n n e c t C o rd s
• Connect the handset cord from the jack at the bottom of the handset
to the jack at the bottom of the phone.
• Connect telephone line cord from the jack at the top of the phone to
the telephone wall jack.
• Place handset into cradle. Red light will flash twice.
• Lift the handset to confirm that a dial tone is present.
For diagram showing installation with an answering machine, see p.9
For instructions on wall mounting, see p.10
7
S t e p 2 S e l e c t t h e L a n g u a g e ( E n g l i s h o r S p a n i s h ) :
a) Press and hold the DIAL key while pressing the left ARROW key to see
the selections.
b) Release the DIAL key to confirm the setting.
S t e p 3 S e l e c t D i a l i n g R u l e
The phone can automatically dial phone numbers that appear in the display.
To do this, the settings must reflect your local dialing rules. If you use
seven digits to dial local calls, select the DIAL 7 DIGITS setting. If you are
required to dial 10 digits in your local area (area code + phone number),
select the DIAL 10 DIGITS setting.
a) Press and hold the DIAL key while pressing the right ARROW key to
see the selections.
b) Release the DIAL key to confirm the setting.
DIAL
ENGLISH
DIAL
DIAL 7 DIGITS