Black Box Surge Protector - Manual (Page 3)

3 of 4 1/16/2007
#11141 724-746-5500 blackbox.com
Choose the model to suit your application from our complete line of in-line surge protectors described below.
• 100BASE-TX Hub Surge Protectors (SP530A-R2–SP532A-R2)—
These models protect 4, 8, or 12 RJ-45 ports on a 100BASE-TX
hub.
• 10BASE-T/100BASE-T Hub Surge Protector (SP512A-R3)—This
model protects a 10BASE-T/100BASE-T interface that uses an
RJ-45 connector.
• ARCNET ® Surge Protector (SP502A)—This model protects
your ARCNET devices that use a coax, straight connection.
• CATV Surge Protector (SP517A)—This model protects CATV
(cable TV) F59 interfaces.
• Centronics ® Surge Protector (SP516A)—This model protects
36-pin Centronics parallel interfaces.
• DDS Surge Protector (SP527A)—This model protects the four
active leads on a standard DDS line.
• Thin Protector ST ® (SP350A-R2)—This model protects your
10BASE2 ThinNet coaxial devices that use a straight
connection.
• AUI Surge Protector (SP362)—This model protects your DB15
AUI interface.
• Thin Protector T (SP501A)—This model protects your devices
that use a T-style connector for 10BASE2 ThinNet.
• ThickNet Protectors (SP505A–SP506A)—These models protect
your 10BASE5 interfaces that require N-series connectors.
• ISDN Data Line Surge Protectors (SP050A-R2, SP060A-R2)—
These models protect terminal adapters, NTUs, and other
ISDN equipment. SP050A-R2 is for the U interface; SP060A-R2
is for the S/T interface (8-pin).
• Keyboard Surge Protector for AT ® (SP518A-R2)—This model
protects 5-pin DIN interfaces.
• Keyboard Surge Protector for PS/2 ® (SP519A-R2)—This model
protects 6-pin mini-DIN interfaces.
• RS-232 Surge Protector for DB25 4-Wire Serial (SP141A)—
This model protects Pins 2, 3, 7, and 20 of your RS-232
interface.
• RS-232 Surge Protector for All Wires (SP360A)—This model
protects all 25 pins on your RS-232 interface.
• RS-232 Surge Protector for DB9 (SP361A-R2)—This model
protects RS-232 ports that use a DB9 connector.
• RS-232 Surge Protector for DB15 (SP507A)—This model
protects your RS-232 ports that use DB15 connectors.
• RS-232 Surge Protector for 4-Wire Serial RJ-11 (SP515A-R2)—
This model protects 4-wire interfaces that use RJ-11
connectors.
• RS-422 Surge Protector (SP508A)—This model protects your
RS-422 or X.21 ports that use DB15 connectors.
• T1 Non-Span Surge Protectors (SP513A-R2, SP526A)—
These models protect T1 interfaces that use RJ-45 connectors.
• Telco Surge Protector (SP365A-R2)—This model protects
dialup telco interfaces.
• Token Ring Surge Protector (SP522A-R2)—This model
protects 8-wire RJ-45 interfaces.
• Twinax Surge Protectors (SP525A)—This model protects
twinax interfaces.
• 100BASE-TX Surge Protectors (SP250A-R2–SP251A-R2)—
These models protect a CAT5 100BASE-TX interface. The
SP250A-R2 is designed to be installed at the building
entrance, and the SP251A-R2 is made for point-of-use
installation.
Technically Speaking
SP517A SP516A SP050A-R2