Warning, No suction, Water is not flowing – Bissell 5200 User Manual

Page 10

Troubleshooting

Water & Formula are draining out from the Clean Tank

Possible Causes

Remedies

Clean Tank black Cap & Insert are not on tight

Remove black Cap & Insert

and attach tightly

Clean Tank black Cap & Insert are cross threaded

Remove black Cap & Insert

and make sure it is

screwed on straight

and

tightly

No suction

Possible Causes

Remedies

Filter may be dirty or clogged

Remove Filter from the Dirty

Tank and clean

Wet Cleaning Nozzle may not be on properly

Make sure Wet Cleaning

Nozzle is on tight and

snapped into place

Dirty Tank is full

Empty Dirty Tank

Filter is wet

Make sure Filter is

completely dry before

placing back into the unit

Water is not flowing

Possible Causes

Remedies

Something is caught and clogging the air path

Unplug unit. Remove Wet

Cleaning Nozzle and insert

a blunt object into the

air path to remove any

potential

clog

Clean Tank is not inserted properly

Remove Clean Tank and

reinsert into the unit

WARNING:

To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.

Your Flip-It can be stored Ready-to-Use, by leaving water
and Formula in the unit. Be sure to remove wet Gentle
Clean™ Pad before storing.

Storing The Flip-It

Tip:

If the Pleated Filter is rinsed
with warm water to clean,
it is recommended to leave
it out of the unit to air dry
before placing it back in
the unit.

ug603_6719_5200E_305.indd 10

1/16/08 2:07:41 PM